Nederlands  English  

Welcome in the webshop of Roukama Japparts Holland
We supply more then 46000 parts from stock, we also supply oem parts on demand

Select Motorcycle

Product 1/14

 Previous 
 Listing 
 Next 

BATTERY LITHIUM ION HJTZ5S-FP JMT


€55.00


Add to Cart:


BATTERY LITHIUM ION HJTZ5S-FP JMT

Lithium-ion batteries from JMT, high-tech for your motorcycle.

 

Batteries of the latest generation, recognizable by the red housing cover.

Replacing a standard lead-acid battery with a JMT lithium-ion battery can save up to 5 kg in weight without any significant effort.

 

Spacer (S)

The battery is equipped with one or more spacers, which are glued under the battery using the adhesive strip supplied, so that the battery fits exactly into the battery box.

 

Waterproof (W)

The battery is completely waterproof and will not be damaged if the motorcycle is cleaned under high pressure.

 

Indicator (I)

All batteries are equipped with a battery status indicator.

Simply press the test button. If all 3 blue LEDs light up, the battery is fully charged. If only 2 LEDs light up, it is only half charged (med). The battery must be charged at the latest when only one LED lights up (low).

 

The following advantages speak in favor of JMT lithium-ion batteries:

- approx. 1/3 of the weight of the comparable lead-acid battery

- Unbeatable cost/weight saving ratio

- Battery housing made of nylon, therefore deformation due to heat is practically impossible

- can be installed in any position as it contains no acid

- contains no heavy metals

- Balanced discharge/charge of all cells through balancer

- Fast charging with high charging current possible (up to 90% in 6 min)

- very low self-discharge (max. 5% per month)

- good performance even at high temperatures up to 60°C

- Safe technology and long service life

 

Due to their specific properties, lead-acid batteries can only use 30% of their capacity,

whereas lithium-ion batteries can use almost 100% of their capacity.

For this reason, the lithium versions of JMT batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting power.

In addition, a built-in processor ("balancer") ensures an even state of charge for all cells.

The dimensions of the lithium-ion batteries correspond to the dimensions of the original lead-acid batteries with the help of adapters.

The connections are also identical, which is why the battery can be replaced in just a few minutes without any further adjustments.

 

Please note that only suitable chargers may be used for charging. We recommend JMP chargers.

Please refer to the technical data below for the maximum recommended charging currents

Under no circumstances should chargers be used that attempt to desulphate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging process.

The maximum charging voltage of 14.9 volts must not be exceeded under any circumstances.

The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.

 

Technology

JMT lithium-ion batteries use iron phosphate (LiFePO4) as the cathode material and use the lithium polymer process in their manufacture.

This means that they cannot burst into flames or explode during normal operation.

The technology and manufacturing process ensure the highest safety standard for lithium batteries.

- 12 V maintenance-free lithium-ion battery

- Recommended charging current 1 A

- Maximum charging current for fast charging 10 A

 

Comparable in dimensions and connections with:

Yuasa Prod. no.

YTZ5S

YTX4L-BS

YTX5L-BS

TTZ5S
*** IMPORTANT *** 

Please note that only suitable battery chargers are used, such as the JMP Skan 1.0 or the corresponding workshop equipment. Please ensure that a compatible charger is used as a wrong charger will invalidate the 2 year warranty. Also be aware that if the charge current off your motor exeeds the 14,9 volts due to faulty regulator etc that its not covered for guarantee..

For fast charging, we recommend the JMP 30000 workshop unit. With this a lithium-ion battery can be charged up to 90% within 6 minutes. For the maximum recommended charging currents please refer to the technical data below. 

In no case must chargers be use that have a de-sulphate mode for deeply discharged batteries (i.e showing 10 volts or less) These chargers use an output of more than 14.9 volts before they begin the actual charging cycle. 
The maximum charging voltage of 14.9 volts must not be exceeded in any case, as in extreme circumstances there can be a danger of explosion. 

Although this lightweight battery is extremely suitable for everyday use, it should be noted that the starting capacity is reduced at temperatures below zero degrees Celsius. 

Technology - JMT lithium-ion batteries are manufactured using a cathode material of iron phosphate (LiFePO4) and lithium-polymer. 

The technology and the manufacturing process ensure the highest safety standard for lithium batteries.

 


  • Model: 707.00.40
  • Manufactured by: RMCP REPRO PARTS







Copyright © 2026 Roukama Holland. Powered by Roukama & Zen Cart